Roll forming systems for
Structural profiles for ground-mounted PV systems
Pay attention: guards and safety barriers have been removed for viewing. All dispositive must be in place for safe operation
Technical sheet:
| Thickness | from 1 to 5 mm / 18 to 4 gauge |
| Production speed | up to 60 m/min - 200 ft/min |
| Setup time | Less than 10 min |
| Flexible roll forming technology | Interchangeable cassettes, Twin |
Gasparini’s roll forming lines for the production of metal structures for ground-mounted PV systems are requested by most manufacturers of mounting structures of photovoltaic modules.
Pickled steel, galvanized steel and aluminum are examples of raw materials that our machines can process. The outcomes of the roll forming are substructures of solar panels: purlin, brackets, reinforcing posts and support.
Our coil processing machines for PV systems can manufacture metal profiles with longer lengths and precise tolerances, achieving narrower bending radii in metal forming.